Specifications

Measurement
System	Discrete, single line random access, multi-test analysis
Number of tests on board	24 or 36 (option) items max. +ISE 3 items
Throughput	240 tests/hour (with ISE 400 tests/hour)
Analytical method	End point, Rate assay, ISE
Calibration curve	Linear, spline, Logit-log, exponential, polynomial.

Sample Handling
Contents of test	Clinical chemistry, homogeneous immuno-assay, TDM, DOA.
Sample container	Cup, Primary Tube
Sample number	55 samples/tray
Sample tray number	10 max. (8 trays are supplied as option)
Sample volume	3-30µ| (0.5µ| steps)
Automatic dilution	Dilution ration: 10 - 100
STAT sample measurement	Interruption permitted even during analysis
Sample identification	Position ID, Bar-code ID (option)

Reagent Handling
Reagent tray	24 sectors, 36 sectors (option)
Reagent bottle	20ml, 40ml, 60ml or 13ml, 26ml, 40ml (option)
Reagent volume	20-330µ| (0.5µ| step)
Reagent cooling temperature	10 ± 2°C
Residual volume information	Calculated by count down system
Reagent identification	Position ID, Bar-code ID (option)
Tray exchange	Possible with reagent bottles

Reaction
Cuvette material	Plastics
Reaction liquid volume	400 µ| max., 200 µ| min.
Reaction time	10 min. (1st reaction: 5 min. 2nd reaction: 5 min.)
Reaction temperature	37°C ± 0.1°C
Wavelength	12 wavelength (340-950nm)
Light Source	Tungsten halogen lamp, 2000 hours type
Linear Range	OD 0-2.5
Cuvette Washing	By the automatic washing system
Reaction Waste	Reaction waste collection pump (option).
Water supply/drain	3.5 litres/hour

User Interface
Run Monitor	Operation status watching
Reaction Monitor	Reaction curve graphic display
Quality Control	Westguard multi-rule
Voice Message	"Sampling stop", "End of Analysis", etc
Data Storage Capacity	Test Results: 6 months
Printer	Internal, External (option)
Power Supply	AC100/115/230V 50/60Hz
Ambient Temperature	15-30°C
Dimensions	800 (W) x 640 (D) x 520 (H) mm
Weight	approx. 80kg

Sapphire 400 test Items

Clinical Chemistry	ACP AMY-P AST-M CK ALB CRE FRA HB TP UA	ACE ALP CO2 yGT ALC CL FE IP T-BIL LIPASE	AM ALT CHE HBDH CA CU GLU LDL-C TG UREA	AMY AST CKMB LDH CHO D-BIL HDL-C MG µ-TP ZN
Immuno-Assay	Ig-G C4 Tf ApoB Fer	Ig-A CRP ß2-M ApoC-11 MA	Ig-M ASO ApoA-1 Apoc-111 CEA	C3 RF ApoA-11 ApoE LP(a)
TDM	PRM PB	PHT CBZ	VAP DIG	TEHO
ISE	Na	K	Cl	Li
DOA	Amphetamines Cocaine Metabolite Methaqualone	Barbituates Cotinine Opiates	Benodiazepine Ethyl Alcohol Phencyclidine	Cannabinoid THC Methadone Propoxphene
Under Development	CEA Myoglobin	D-Dimer PSA	HbAlc Troponin	Homocysteine

ISE Unit

• Easy electrode replacement
• Individual electrode replacement
• Automatic calibration
• Automatic electrode cleaning

All the above reported features can be changed without prior notice

Complying with EMC EC Directives



Hitachi® 704, 717, 902,904, 911, 912, 917, Modular P® are registered Trade Mark of Nissei Sangyo Co. Ltd., Japan.
AU® 400, 600, 1000, 20000 and 5000 are registered Trade Marks of Olympus Corporation Lake Success, New York, USA.
Express 550® and Express Plus® are registered Trade Marks of Bayer / Chiron Diagnostics Ltd.
Sapphire® 120, Sapphire® 350, Sapphire® 600, Drylab®, Liqui-Stat® are registered Trade Marks of Audit Diagnostics, Cork, Ireland.
Konelab® 20, 30 and 60 are registered Trade Marks of Thermo Kone Corporation, Finland .