Type	Semi-automatic, single-beam filter photometer.
Measurement Procedures	Absorbance Endpoints with standard or factor, with or without reagent blank and/or sample blank. Kinetics with standard or factor, with or without reagent blank rate and linearity check. Fixed time with or without reagent blank. Curve fitting for non-linear standard curves.
Measuring Time	Programmable Kinetic: variable from 15-300 sec in 5 sec steps. Fixed time: variable from 5-300 sec in 1 sec steps.
Delay Time	Programmable 0-59 sec.
Light Source	Halogen lamp - 12 V, 20 W.
Wavelength	340nm - 800nm.
Wavelength Selection	Automatic via 8-position filter wheel: 5 standard interference filters: 340nm, 405nm, 492nm, 546nm, 578nm. 3 positions for optional filters of choice.
Photometric Range	0-2.5 Bel.
Cuvette System	Microflow cell: 32µ|, 10mm light path interchangeable against microflow cell with 60µ|, 5mm light path and normal standard cuvettes (macro or semi-micro, disposable or special optical glass).
Temperature Control	Internal Peltier elements, temperature variable, pre-adjusted to 25°C, 30°C and 37°C. Equilibration time for aspirated reaction mixture to reach 37°C from ambient temperature: 15 sec.
Aspiration System	Built-in peristaltic pump driven by stepper motor, programmable.
Reaction Volume	250-60Oµ| per test.
Operator Interface	Membrane keyboard with 20 keys for direct functions and numeric entries.
Data Presentation	LSD display: 2 lines of 16 characters each, easy to read and offering simple user guidance.
Integrated Printer	Dot-matrix printer, 24 characters per Iine.
Memory	General operating software contained in EPROM (6 language versions and capacity for some 300 preprogrammed test variants). Up to 8 non-linear calibration curves and settings for 12-28 additional tests can be stored in RAM.
Signal Ports	1 serial and 1 parallel port for connection to an external printer and/or computer (bi-directional interface).
Dimensions	Length 33cm x width 34cm x height 18cm.
Weight	8.5kg

All the above reported features can be changed without prior notice

Complying with EMC EEC Directives


Hitachi® 704, 717, 902,904, 911, 912, 917, Modular P® are registered Trade Mark of Nissei Sangyo Co. Ltd., Japan.
AU® 400, 600, 1000, 20000 and 5000 are registered Trade Marks of Olympus Corporation Lake Success, New York, USA.
Express 550® and Express Plus® are registered Trade Marks of Bayer / Chiron Diagnostics Ltd.
Sapphire® 120, Sapphire® 350, Sapphire® 600, Drylab®, Liqui-Stat® are registered Trade Marks of Audit Diagnostics, Cork, Ireland.
Konelab® 20, 30 and 60 are registered Trade Marks of Thermo Kone Corporation, Finland .